House Speaker Jim Tucker was direct when expressing his feelings toward attempts to repeal the state's motorcycle helmet requirement. via Thenew995fm.com
The chief executive officer of Harley-Davidson Inc. received compensation last year that the motorcycle maker valued at almost $4.1 million, a drop of nearly 4 percent from the previous year, according to a ... via International Business Times
A Harley Davidson owned by Federico Castelluccio and signed by 20 cast members of the HBO hit series is being offered in an online auction next month. via New York Daily News
BMW Motorrad USA becomes the official AMA Adventure Riding Series sponsor. March 28, 2008 US - With thousands of square miles of excellent riding terrain literally on the doorstep, BMW GS owners in the USA ...
Join the Choppers Forum at Street Chopper Magazine to discuss your custom chopper, modifications & projects, places to ride, latest news, shows & events, and more.
Advice on a trade
I guess I'm sick of these most of these guys being scared of old bikes. I try to get some advice from a different forum and I knew they would give me the answer I didn't want to hear. I really want to get into working on my own bike more and have been slowly getting into it with little mechanical
Re the Isles in Denver -- what to think?
Back in October 2007 I took my Norton chopper to The Isles British motorcycle shop in Denver because it was puking oil out one pipe. Greg, the owner had an excuse every month why he didn't start work on my bike. It was one thing after another. Finally in August 2008 he starts work, thinking I needed
Need 1971-72 Chopper Magazine covers
Back in either 1971 or 1972, my father who is now in his 70's, painted a very popular and rare motorcycle (he claims it was a Harley) that was featured on the cover of a magazine called "Chopper Magazine", and the bike was painted pearl white by him and was featured on the cover of the magazine. The
Need help!!! dual engine trike in back issue
I have lost a copy of a magazine and need help locating a photo or copy of this magazine. Without it I can not fullfil my dream.
I believe it was THE BEST of STREET CHOPPERS, and it was included when I bought a copy of easyriders mag.
I believe it had stallone on the front.
What I am looking for
BDL Primary - Revtech Transmission
I am currently buidling a bike and I've run into my first big snag. I have a revtech 6 speed transmission and a BDL 3" open primary. I tried putting the two together and they won't fit. The inside dimension of the bearing is 24mm and the outside dimension of the transmission mainshaft is 25mm. I
Computer Sensor Timing the ECU
Sound weird :confused: Lets make this so easy to learn the computer bike, we are going to chop till there is no tomorrow and a black box is not about to ruin the party.
So, if you would like to chop that computer type bike, keep the telemetry on, you can do all of it and have that bike run like st
3/4 Chopper Project
I am condsidering building a 3/4 size motorcycle (not a mini chopper) for my son with a 50-110cc engine. I will probably build the frame myself, but I haven't yet found a good source for parts, such as the controls, wheels, sheet metal and whatever. Let me know if you have any ideas. Thanks,
Todd
L.E.D. Lighting
Any recommendations out there for LED light installations? Would like to make the bike more visible at night, more for safety reasons than for 'looks'.
El Chingon
[img]http://elchingonmotorcycle.blogspot.com/[/img]
Warning about CP KUSTOMS
This is a warning about CP KUSTOMS custom bike builders and its owner Chuck Palumbo.
I'm not a great writer but please read this all, its important.
I've found one guy who posted on a forum that one bike that the WWE tried to claim was built by Palumbo was a bike built by this other individual an
Warning about CP KUSTOMS
This is a warning about CP KUSTOMS custom bike builders and its owner Chuck Palumbo.
I'm not a great writer but please read this all, its important.
I've found one guy who posted on a forum that one bike that the WWE tried to claim was built by Palumbo was a bike built by this other individual an
Warning about CP Kustoms
This is a warning about CP KUSTOMS custom bike builders and its owner Chuck Palumbo.
I'm not a great writer but please read this all, its important.
I've found one guy who posted on a forum that one bike that the WWE tried to claim was built by Palumbo was a bike built by this other individual an
Final drive belt width when using 140/90 tire
If I use a 3.5" x 16" rim with a 140/90 rear tire on an 99 OEM type softail frame can I still use a 1.5 inch rear pully and belt or will the tire rub the belt? If so,will I have to change both the belt and pulley to a 1.25 width? :confused:
The Primer Nationals Show is Coming up!
Our Pal's John and Jen Parker are ready to treat us all to one of the best Bike & Car shows on the West Coast. for more info, head on over to their site at: http://www.primernationals.com/ or make friends with them at their myspace: http://www.myspace.com/primernationals
basic wiring for 01 XL Bobber conversion
I chopped and stripped my 01 Sporty and only want to run a Headlight and taillight, and of course the ignition wires. With the excitment, I stripped the bike without remembering what-went-where, can some one help me with a basic, even handdrawn, skematic of what I need to do?
Custom exhaust
Does anyone know of someone who will build a custom exhaust for me. I have a 75 Amen Savior with a Z1 engine. Has all original parts, but time has not been kind to it. Looking for someone who could replicate the original 4 into two turnouts. I want to restore it to as close as original as possible.
What is YOUR idea of a what a Street Chopper really is?
hey kids!
I was (un)lucky enough to join the staff of SC the issue before it was kicked down to 2 issues a year. back in the day when we had 12 or 6 issues a year, we had plenty of space to put in bikes of all shapes and sizes. Now with trying to shove all of what we are about into two issues we al
big easy chopper crooks
i paid 37,000.00 for a custom chopper to be built and took delivery dec. 1, 07 it has been in the shop 137 of the 162 days that i have owned it. it needs a new motor which big easy admits, but they have not done this even though they told me numerous times they were in the process of installing one
looking for old street chopper, '69or'70
I am rebuilding my old Indian that was in Street Chopper in '69 or '70 (I think)The mag listed the bike on cover-Honest Charlie's Muscle Machine.It is Indian Chief in very modified K model frame. Very low, cut down seat like the "new" style popular now. This bike had dual disks on front with disk on
Demon's Cycle Headed to CO!
Hey guys, what's up? My name is Garret McLaughlin and I will be running our new shop in Durango, CO. Just wanted to stop in and say hi! Ride safe...but fast!
Beware of Underground Choppers...Nashville Tn!!!!!
First, let me start by saying that I am not here to bash this guy but I MUST inform people of the factual nature of my business dealings with him. I do not want to see the same thing happen to other people.
To all that may be thinking of using Wild Bill or Underground Choppers in Nashville . I have
Resealing the inside of gas tank
I have a used custom gas tank that I need to remove the previous tank sealer from the inside.I can see ninor rust spots insidr tank and I removed a couple of dollar bill sized flakes of the previus sealer from the tank.I was told that M.E.K. was capable of doing this ,but when I put one of the flake
Pros and cons of 1999 harley 1340 80c.i. engine?
I found a new ,in the crate ,1999 harley d. 1340/80ci motor for a great price.I would like to find out the good, the bad, and the ugly about this type of engine.I just so happen to drive the last production year of the shovelhead so it seems appropriate that I am condidering the last year of the evo
Hi Viking Lost in Thailand
Hi I am a new member! :cool:
I found the page while searching for "How to weld Stainless Steel" and it looks like a Cool site with a lot of interesting Stuff. :D
I have a problem as indikated in titel. I'm lost in Thailand. :(
Lost in the sence that I can not get (or trust) the workshops to do
Melrose Mayhem - Powerplant Choppers
Am I the only one, or does anybody find it kinda f***ed that there's a builder out there always posin' on 'his' bike doing Indian Larry's old 'trick'? Not only did Larry surf on his bike as his signature trademark, but we all know he died doing it. Don't know about anybody else out there but I think
RSS Feeds 
